Path C: legacy command called client.get_artist_tracks (the
/artist/get?extra=tracks path) and returned a TracksContainer.
No existing v2 equivalent, so add v2_get_artist_tracks via
QbzCore -> QobuzClient::get_artist_tracks directly.
cc
Path C: legacy command called client.get_artist_detail with the
hard-coded mobile defaults of limit=1000, offset=0 to populate the
suggestions panel's playlists and tracks_appears_on. No close v2
equivalent existed (v2_get_artist_with_albums uses
extra=albums only), so add v2_get_artist_detail that goes through
QbzCore -> QobuzClient::get_artist_detail directly.
cc
Path C: legacy command projected `Artist.albums` from
client.get_artist_with_pagination(with_albums=true). The existing
v2_get_artist_with_albums returns the full Artist envelope, so
add a dedicated v2_get_artist_albums in QbzCore that performs the
same projection and exposes only ArtistAlbums to match what the
two callsites destructure.
cc
Add v2_get_flatpak_help_text as a thin wrapper over the existing
flatpak::get_flatpak_guidance(). Update the frontend invoke in
SettingsView.svelte to use the v2 name. Legacy command remains for
now.
Audit: legacy_callsites 12 -> 11.
cc
Add v2_detect_desktop_theme as a thin wrapper over the existing
desktop_theme::detect_desktop_theme(). Update the frontend invoke in
windowControlsStore.ts to use the v2 name. Legacy command remains
for now.
Audit: legacy_callsites 13 -> 12.
cc
Add v2_get_qobuz_tos_accepted as a thin wrapper over the existing
config::legal_settings::get_qobuz_tos_accepted. Update the frontend
invoke in qobuzLegalStore.ts to use the v2 name. Legacy command
remains for now.
Audit: legacy_callsites 14 -> 13.
cc
Add v2_has_snap_welcome_been_shown as a thin wrapper over the
existing UpdatesStore::has_snap_welcome_been_shown(). Update the
frontend invoke in updatesService.ts to use the v2 name. Legacy
command remains for now.
Audit: legacy_callsites 15 -> 14.
cc
Add v2_has_flatpak_welcome_been_shown as a thin wrapper over the
existing UpdatesStore::has_flatpak_welcome_been_shown(). Update the
frontend invoke in updatesService.ts to use the v2 name. Legacy
command remains for now.
Audit: legacy_callsites 16 -> 15.
cc
The test was added in 145974c29 when the default device name was a
const "QBZ Desktop". A later refactor (bf91822b4) replaced the const
with hostname-derived "Qbz - {hostname}" plus env-var/persisted-DB
overrides. This left the renderer fixture asserting a friendly_name
that no longer matches what default_qconnect_device_info() returns,
so refresh_local_renderer_id correctly returned None and the test
panicked.
Read the local device info inside the test and use those fields for
the renderer that should match. The test now exercises the contract
("when device_uuid is missing, fall back to a unique fingerprint
match against the local device info") regardless of host environment.
cc
When QConnect is on AND the local app is the active renderer, every
local next/play_index round-trips back through the Qobuz cloud as a
SET_STATE echo. apply_renderer_command_to_corebridge unconditionally
called align_corebridge_queue_cursor, which races the user's already-
advanced local cursor and triggers a second play_index, pushing a
duplicate index onto QueueManager.history. That is the duplicates half
of issue #316.
Mirror the gating that sync_active_renderer_projection already uses:
align the CoreBridge cursor only when local is NOT the active renderer.
The existing peer-driven flow (peer is active renderer, echoes arrive
to drive our cursor + history) is unchanged.
cc
Previously, an Err from app.connect() would propagate via ? while
lifecycle_state remained at Connecting and runtime was None, leaving
the frontend toggle stuck "on" (because isQconnectToggleOn treats
Connecting as on) with no live runtime. This recreated the exact
user-visible bug 23658b05 was trying to fix, just triggered from a
different upstream failure.
Convert the ? propagation into explicit error handling that resets
lifecycle_state = Off and records last_error before returning Err,
so the toggle correctly flips off and a subsequent connect() starts
fresh.
Refs: #358
cc
When the reconnect loop is stuck waiting for a SESSION_STATE that never
comes (the actual symptom of issue #358), the runtime is alive but
`transport_connected` is false. The UI used to read its on/off toggle
from `transport_connected`, so the badge appeared OFF while the backend
loop kept retrying. Worse: clicking the toggle in that state called
`connect()`, which rejected with "QConnect service is already running".
The user had no way to disable QConnect from the UI — only to "turn it
on more", which failed.
Backend (`qconnect_service.rs`):
- Add `QconnectLifecycleState` enum (Off / Connecting / Connected /
Reconnecting / Exhausted) and surface it on
`QconnectConnectionStatus::state`. Driven from the spawned transport
event loop via a new `update_lifecycle_state_if_running` helper which
refuses to overwrite terminal states (Off / Exhausted) with late
Reconnecting / Connected events from the broadcast queue.
- Make `connect()` idempotent: if a runtime already exists (alive but
reconnecting), return current status instead of erroring. The toggle
is the single user-visible control; the previous "already running"
error was unactionable from the UI.
- Auto-stop on `MaxReconnectAttemptsExceeded`: take the runtime out,
set state=Exhausted, set last_error to the cloud reason, and emit a
`qconnect:status_changed` event so the frontend reflects the new
state without waiting for its 5 s poll. The transport loop has
already exited at this point, so a fresh user-initiated connect()
cleanly starts a new runtime.
- `disconnect()` now forces lifecycle to Off unconditionally and tears
down the runtime (already worked, the transport's `shutdown_tx`
watch breaks `handle_reconnect_delay` mid-sleep), satisfying the
"disable QConnect must always succeed" requirement.
Frontend (`qconnectRuntime.ts`, `+page.svelte`):
- Add `QconnectLifecycleState` mirror type and `isQconnectToggleOn()`
helper.
- Split state in the page: `isQobuzConnectConnected` keeps its old
semantics (`transport_connected`) and gates send-command paths
(volume reports, position reports) so we don't fire commands while
the WS is down. New `isQobuzConnectToggleOn` reflects the
user-facing on/off — true even during Reconnecting/Connecting — and
is what the badge component and the toggle handler now read.
- Listen for the new `qconnect:status_changed` event so the toggle
reflects auto-stop (Exhausted) and other transitions immediately
instead of after the 5 s status poll.
Refs #358
cc
The MSG_TYPE_ERROR (cloud_type=9) arm previously logged only the payload
byte count, so when Qobuz cloud rejected a session (zombie session,
conflicting device, expired JWT, ...) we had no signal beyond an opaque
"bytes=13" TransportError. That hid the actual cause of the 2s flicker
loop seen after the app sat minimized for 1-2 hours (issue #358).
The qws.proto ErrorMessage (messageTypeId=9) carries:
uint32 msg_id = 1
uint64 msg_date = 2
uint32 code = 3
string descr = 4
Decode it via a local QwsErrorMessage prost struct, log a warn line with
the decoded code+descr, and emit a new TransportEvent::CloudError so
qconnect-app and qconnect_service can react. qconnect_service forwards
it as a "qconnect:cloud_error" diagnostic (level=warning) and logs it.
qconnect-app treats it as a no-op forwarder for now, matching the
existing pattern for other transport-only events. Decode failures fall
back to the previous TransportError path under a distinct stage name so
they are still visible.
Adds a tokio test that builds a real MSG_TYPE_ERROR frame and asserts
the transport emits CloudError (not the legacy TransportError).
Refs #358
cc
The native WS transport reset its reconnect counters as soon as the WS
upgrade succeeded. Qobuz cloud accepts the WS connection well before the
JOIN_SESSION exchange and rejects unhealthy sessions with MSG_TYPE_ERROR
right after, so the counter reset every cycle and the loop hammered the
endpoint at base backoff (~2s) forever (issue #358).
Move the counter reset to the moment the cloud emits a
MESSAGE_TYPE_SRVR_CTRL_SESSION_STATE event (the actual proof of a healthy
session-level join), and add a configurable maximum-attempts cap that
makes the transport stop and emit MaxReconnectAttemptsExceeded instead
of looping indefinitely.
- Add SessionEstablished and MaxReconnectAttemptsExceeded transport events.
- Add reconnect_max_attempts to WsTransportConfig (default Some(10)).
- handle_incoming_binary now returns whether SESSION_STATE was decoded.
- Reconnect helper returns a ReconnectOutcome enum (Continue/Shutdown/
Exhausted) instead of a bare bool.
- qconnect_service.rs logs the new events and emits a diagnostic when
the cap is exceeded so the higher layer can react (#358-fix-3 will
surface it in the UI).
- Unit tests cover the cap behavior and the unbounded fallback.
Refs #358
cc
End-to-end DJ-mix command. Loads the collection, resolves its natural
in-order track list, dedupes near-duplicate versions, samples up to
sample_size tracks under the per-album cap, replaces the queue, and
starts playback from index 0. Stamps queue_source_collection and bumps
the play counter (mirroring v2_enqueue_collection's replace mode), but
does not modify the collection's persistent play_mode.
Returns ShuffleTracksResult { requestedCount, actualCount } so the
frontend can show the trimmed-mix toast when the cap or dedup shrinks
the pool.
ThreadRng is not Send, so dedup + sample run inside a sync scope that
ends before the bridge awaits.
cc
Resolves the collection's natural in-order track list and returns the
count of distinct songs after similarity-based deduplication. Used by
the upcoming track-mix modal to size the slider of pickable queue
sizes. Auth gated; deterministic output.
cc
Round-robin sampling that picks up to `requested` tracks from a
deduped track list. Each album bucket is shuffled in place and
truncated to cap = max(2, ceil(requested * 0.30)); rounds permute
the album order so cross-album distribution is randomized too. May
return fewer than `requested` when the per-album cap and bucket
sizes do not add up — callers report this gap to the user.
7 new tests (37 total) including a 200-seed statistical test
confirming the cap is never exceeded.
cc
- unique_track_count returns the count of distinct songs after grouping
near-duplicate versions; deterministic, no RNG.
- dedup_by_similarity collapses each duplicate group to one survivor
picked at random via the supplied RNG. Output preserves input order
of survivors.
Both share a single bucketed Union-Find pass: tracks are first grouped
by exact normalized artist, then unioned within each artist bucket
when their normalized titles score >= 0.80 on token_set_ratio. Cross-
artist comparisons are skipped to avoid false positives like "Yesterday"
by different artists.
12 new tests (30 total in this module) including a 200-seed statistical
test confirming every duplicate version can be selected as the winner.
cc
Pure-function helpers used by the upcoming track-mix sampler:
- normalize_title strips parens/brackets, dash suffixes, feat patterns,
punctuation, and diacritics.
- normalize_artist keeps parens (band suffixes carry meaning) and just
lowercases + strips diacritics.
- token_set_ratio implements the RapidFuzz-style token-set similarity in
[0.0, 1.0] using strsim's normalized Levenshtein.
Promotes strsim from transitive to direct dep. 18 unit tests cover the
core normalization and similarity behaviors.
cc
Add audio_cache_l1_max_bytes to MemoryProfile and wire it into
AppState's AudioCache constructor. Normal hosts keep the historical
400 MB cap; LowMemory hosts drop to 50 MB.
Without this, a Pi 3B (1 GB total) starts with the L1 cache cap set
at ~40 % of physical RAM. Even with the Feature #3 prefetch caps
already in place, the runtime watchdog from the previous commit
ends up firing more often than necessary because nothing prevents
a single L1 fill cycle from claiming 400 MB. Capping at 50 MB caps
how much the cache can grow before either: (a) eviction picks up
naturally, or (b) the watchdog steps in if the rest of the system
is also under pressure.
Pure refactor in lib.rs — replaces a hard-coded 400 * 1024 * 1024
with a profile field read. The default-constructed AudioCache
fallback (when disk-spillover init fails) keeps its own crate
default; no need to thread the profile there since the failure
path is rare.
Two tests added: a presence-bound assertion in the existing Pi 3B
case, and an explicit comparison that LowMemory's cap is strictly
smaller than Normal's.
cc
Tauri setup() now spawns a tokio task that polls
qbz_core::system_capabilities::read_memory_pressure() every 10 s
when the resolved MemoryProfile classifies the host as LowMemory.
On Normal-class machines the task is never spawned, so polling cost
is zero where it isn't needed.
Behavior:
- pressure.is_critical (< 5 % MemAvailable) triggers
audio_cache.clear() once per critical episode and logs at warn.
Both L1 (in-memory tracks) and L2 (disk spillover) are flushed —
the disk hit on subsequent playback is far cheaper than letting
the OS swap-thrash through the audio thread.
- pressure.is_low (< 15 %) is logged once at info as an early
warning but does not evict.
- Recovery (back above 15 %) logs once and arms the next critical
episode.
The was_critical edge guard prevents log spam when pressure
oscillates near the threshold during heavy prefetch.
For codehd7's Pi 3B scenario (issue #331): when QBZ pushes
MemAvailable below ~47 MB (5 % of 938 MB), the watchdog flushes
the cache, frees memory back to the kernel, and the network stack
recovers from the swap thrash that was killing playback.
cc
StreamingConfig::from_speed_mbps inflates the initial buffer to 2 MB
on slow connections (< 1 MB/s) to absorb network jitter. On a healthy
desktop that's fine, but on a memory-constrained host the slow link
is itself a symptom: when QBZ on a Pi 3B starts allocating ~300 MB
of Hi-Res prefetch the kernel swaps, networking stalls, the speed
detector reports < 1 MB/s, and the buffer code reacts by allocating
ANOTHER 2 MB — exactly the wrong direction.
Add a process-wide AtomicUsize cap (defaults to usize::MAX, i.e.
no-op) plus a small public set_max_initial_buffer_bytes setter.
Refactor from_speed_mbps to clamp through the cap; extract the
speed-to-bytes ladder into a pure raw_initial_buffer_for_speed
helper plus a from_speed_mbps_with_cap variant that exposes the
clamping for unit tests without touching global state.
src-tauri/lib.rs's run() wires the cap into qbz-player from
qbz-core's MemoryProfile right after logging the profile. Effective
on Pi 3B (issue #331): all StreamingConfig::from_speed_mbps results
pin to 256 KB regardless of detected speed.
Re-export max_initial_buffer_bytes / set_max_initial_buffer_bytes
from qbz_player::player so external callers don't need to reach
into the private streaming_source module.
Adds 5 unit tests: ladder behavior, pass-through when cap is loose,
clamp at the LowMemory cap (the issue #331 case), no-op at the
Normal cap, and that max_buffer_bytes stays unchanged.
cc
Wire qbz-core's detected MemoryProfile into the V2 prefetch loop so
memory-constrained hosts (Pi 3B and similar, < 2 GB RAM) cap their
in-memory footprint:
- V2_PREFETCH_COUNT becomes a function reading profile.prefetch_count
(5 on Normal, 1 on LowMemory). Reading it once per loop call is
cheap — OnceLock-cached behind the scenes.
- V2_MAX_CONCURRENT_PREFETCH likewise becomes a function; the
semaphore lazy_static initializes from it once at process start.
- Effective prefetch quality gets a low-memory cap before the
hardware-rate ladder runs. When profile.allow_hires_prefetch is
false we drop UltraHiRes/HiRes to Lossless so each cached track
stays under ~15 MB instead of ~60 MB. The hardware downgrade
still runs after, so a low-memory + 48 kHz-only DAC still gets
the right rate.
- lib.rs forces an early call to memory_profile() in run() so the
resolved profile is logged at boot rather than at first prefetch.
For codehd7's reported case (Pi 3B, 1 GB, HifiBerry Digi2 Pro,
issue #331): the active profile becomes prefetch_count=1,
max_concurrent_prefetch=1, allow_hires_prefetch=false. Cached
prefetch footprint drops from ~5 × 60 MB = 300 MB to a single
~15 MB Lossless track — well within the headroom that 1 GB minus
WebView (~150 MB) leaves.
cc
libasound's default error handler prints directly to stderr. During
device enumeration probes, PCMs that wrap dmix or surround routes emit
benign errors ("unable to open slave", "no matching channel map") that
cluttered the app log without indicating a real problem.
Install a process-wide snd_lib_error_set_handler shim from
AudioBackendFactory::create_backend (idempotent via std::sync::Once)
that forwards the file/line/function/err/fmt tuple to log::debug. The
messages stay available with RUST_LOG=debug and disappear during
normal runs.
Adds alsa-sys 0.3 as a direct Linux-only dependency on qbz-audio
(previously transitive via alsa/cpal). The handler is declared
non-variadic and transmuted into libasound's variadic function pointer;
ignoring the unused varargs is ABI-compatible on every platform we
support.
cc
Fixes GHSA-cq8v-f236-94qc (low: rand unsound with custom logger using
rand::rng()). Transitively bumped across both src-tauri and crates
workspaces via cargo update.
cc
Mixtapes & Collections release. Bumps all version references
(Cargo.toml, tauri.conf.json, package.json, snapcraft.yaml, both
Cargo.lock, package-lock.json), adds the 1.2.8 entry to the Flatpak
metainfo, and sets the About modal codename to "My QBZ".
cc
Offline-cached Qobuz tracks should appear in the Local Library on a
fresh install — the whole point of caching is to have them available
alongside local files. Users who set the preference explicitly (on or
off) are untouched: the INSERT OR IGNORE in DownloadSettingsStore
only writes the default row when no row exists yet.
Three coordinated changes inside download_settings.rs:
* DownloadSettings::default().show_in_library: false → true
* Schema DEFAULT on the column: 0 → 1 (covers rows added post-
migration from code paths that skip the explicit INSERT)
* The INSERT OR IGNORE seed row now interpolates
default_settings.show_in_library instead of hardcoding 0, so the
code default and the SQL default stay in sync.
cc
Plex thumbnail URLs carry X-Plex-Token (and sometimes
X-Plex-Client-Identifier) as a query parameter. Those rotate each
time a token refresh lands, so the *exact same* /library/metadata/…/
thumb resource hashes to a different cache key between sessions, and
the backend dutifully re-downloads and re-caches the same bytes under
the new hash. On a collection that's mostly Plex (the user's 67-item
case), that means every open re-pulls 67 images over the network —
which is indistinguishable from "caching isn't working".
Normalize the cache key on both sides, keeping the original URL for
the actual authenticated fetch:
* src-tauri: cache_key_for() strips X-Plex-Token and
X-Plex-Client-Identifier before hashing. The `url` passed to
reqwest is still the original with token, so the GET authenticates
correctly; only the on-disk cache key is stable across sessions.
* frontend: same normalization in imageCacheService.cacheKeyFor()
covers the in-memory resolvedUrls map, pendingRequests dedup,
getResolvedIfCached sync hit, and preloadImages "skip if already
cached" short-circuit.
Non-Plex URLs are untouched — no '?' means no normalization work.
Qobuz's static.qobuz.com CDN URLs don't carry session params, so they
already cache correctly and this is a no-op for them.
cc
Final piece of the Plex-in-playlist plumbing. PlaylistDetailView now
loads the (ratingKey, position) pairs from playlist_plex_tracks and
hydrates metadata from plex_cache_tracks, then interleaves the results
with Qobuz and local tracks by playlist_position so the ordering the
user sees matches what got stored when they added each track.
Backend:
* plex_cache_get_tracks_by_keys(rating_keys) in plex/mod.rs returns
PlexTrack metadata for a set of ratingKey strings, skipping keys
the cache doesn't know about.
* v2_plex_cache_get_tracks_by_keys Tauri command exposing it,
registered in lib.rs.
Frontend:
* New PlaylistPlexTrack interface + plexTracks state alongside the
existing localTracks pipeline.
* loadPlexTracks() does the two-step hydrate (positions, then meta).
Called in parallel with loadLocalTracks and loadPlaylist.
* plexTrackToDisplay() converts to DisplayTrack. The frontend id is
derived from the ratingKey via a djb2 hash offset into a
PLEX_DISPLAY_ID_OFFSET-anchored negative range — stable and never
collides with local (small negative) or Qobuz (positive) ids.
* displayTracks interleaves local + plex + Qobuz tracks by position.
Fast path unchanged when neither source has content.
* hasLocalTracks, totalTrackCount, totalDuration, and the sidebar's
hasLocalContent indicator all pick up Plex rows automatically
because the backend's get_all_playlist_local_track_counts already
merged the plex count in an earlier commit.
Missing plex cache entries (purged, never hydrated) are silently
dropped instead of rendering placeholder rows — the playlist just
shows fewer Plex tracks until the next Plex cache refresh.
Fixes the bug: Plex tracks can now be added from LocalLibrary and
they show up in the playlist detail view, completely decoupled from
the Qobuz playlist API.
cc
Wires the qbz-library methods added in the previous commit to Tauri
invoke handlers:
* v2_playlist_add_plex_track(playlistId, ratingKey, position)
* v2_playlist_remove_plex_track(playlistId, ratingKey)
* v2_playlist_get_plex_tracks_with_position(playlistId)
All three lock LibraryState::db, mirror the existing local-track
commands, and go nowhere near the Qobuz API surface — no chance of a
Plex ratingKey being forwarded to /playlist/addTracks by mistake.
Registered in lib.rs invoke_handler next to v2_playlist_add_local_track.
cc
Plex has the same cast routing problem as local library: the Qobuz-only
play_track commands can't resolve Plex ratingKeys. Add dedicated commands
that fetch bytes through plex_resolve_track_media (existing), proxy them
through the cast media server, and load the URL on the renderer.
Proxying through the media server (rather than giving the renderer a
direct Plex URL) keeps the user's Plex token in-process. Renderers would
need the token to fetch from Plex directly and that's not a surface we
want to expose.
Content-type fallback to audio/mpeg when Plex omits it (transcode path),
with a plex_key_to_u64 namespaced hash (high bit set) so Plex ratingKeys
can't collide with Qobuz/library ids in the MediaServer keyspace.
cc
Companion to v2_dlna_play_local_track. Same bug, same fix applied to the
Chromecast protocol branch: reads library row + file, infers content_type,
registers bytes with the shared media server, loads the URL on the
Chromecast receiver. Reuses the local_track_content_type helper.
User flagged this on the #332 thread — same Qobuz-only assumption in the
Chromecast play command as in the DLNA one.
cc
Mirrors v2_dlna_play_track but for library row ids. Reads the file from
disk, infers content_type from AudioFormat (with extension fallback for
Unknown), registers bytes with the DLNA media server, sends AVTransport
URI + Play to the renderer.
Without this command the cast path had no way to send local audio to a
DLNA device — v2_dlna_play_track resolves the id as a Qobuz track and
fails (404 in offline sessions, wrong-song match in online sessions where
the library row id happens to collide with a real Qobuz track id). Issue
#332 reported the symptom as "DLNA not operational"; logs showed the
renderer connected successfully but never received a SOAP SetAVTransportURI.
Frontend wiring in the cast dispatch + playbackService guard removal lands
in follow-up commits.
cc
Backend:
- New v2_enqueue_collection_item(collectionId, position, mode) routes a
single collection item through the existing ProdItemResolver — same
path v2_enqueue_collection uses, scoped to one position. Supports
replace / play_next / append modes. Unlocks per-album Play for local
and Plex items from the Collection detail view (previously only Qobuz
had a working fast-path there).
- enqueue.rs: resolve_local_album now detects plex: prefixes and routes
to plex_cache_get_album_tracks instead of querying local_tracks, so
Collections with Plex albums actually enqueue end-to-end.
- repo.rs: list_collections now hydrates items for every collection so
the item count in CollectionsView / MixtapesView is real, not 0.
- mixtapeCollectionsStore.ts: bindings updated for new + changed
commands (add_item with allow_duplicate, item_exists, custom cover
upload/remove).
cc
Lets users pick any image (png/jpg/jpeg/webp) as a Mixtape's or
Collection's cover. Mirrors v2_library_set_custom_album_cover:
source → artwork cache dir → resize to 1000x1000 via image crate →
store path in mixtape_collections.custom_artwork_path.
- v2_mixtape_upload_custom_cover(id, source_path): validates extension,
copies + resizes, stamps the resulting path, deletes the previous
cover file after the DB write succeeds.
- v2_mixtape_remove_custom_cover(id): nulls the column + deletes the
on-disk file.
- Both registered in lib.rs.
- Frontend store: uploadCustomCover / removeCustomCover wrappers that
also patch collectionsStore optimistically so UIs update without a
full reload.
Uses mixtape::repo::get_custom_artwork (added in the previous commit)
to find the previous path before overwriting.
cc
QueueManager::clear previously always preserved the current track;
plus bridge.play_index only mutates queue state, never triggers
audio. Result: when the user hit Clear Queue with nothing playing,
a stale track stayed in NOW PLAYING across app restarts.
- QueueManager::clear(keep_current: bool) — existing callers pin to
true (legacy behavior). New test covers the false path.
- QbzCore::clear_queue / CoreBridge::clear_queue take the flag through.
- v2_clear_queue accepts an optional includeCurrent flag from the
frontend; when true, calls bridge.stop() first so the audio pipeline
actually stops, then wipes the current slot too.
- qconnect sync path + qbzd daemon pin keep_current=true (no behavior
change).
cc
Plex exposes album release year (parentYear / parentOriginallyAvailableAt)
and genre (inline attr or nested <Genre tag>). The parser dropped both;
LocalLibrary and DiscographyBuilder could never show a Plex album's year
even though the metadata was available upstream.
- Extend PlexTrack + PlexCachedAlbum structs with year/genre.
- Parse both in parse_track_block, including the ISO-date fallback.
- ALTER TABLE plex_cache_tracks ADD COLUMN year INTEGER / genre TEXT
(idempotent).
- INSERT + SELECT paths + the album aggregation carry the new columns.
cc
list_collections only read the mixtape_collections row and left
items=[], so every consumer (sidebar, Collections/Mixtapes grid,
AddToMixtapeModal) saw zero-item counts for every collection. Load
items per collection at the end of the listing, matching what
get_collection already does.
cc
In-memory Option<String> tracks which Mixtape/Collection the current
queue was built from. Set by v2_enqueue_collection, cleared by any
non-Mixtape queue replacement (set_queue / clear_queue). Append-style
ops (add/add_next/bulk) preserve the context.
Persistence across restart is deferred — the session_queue_state
table does not exist yet; when it arrives, the ALTER in
mixtape::schema will add the source_collection_id column automatically,
and this state just needs a read+write on the appropriate bootstrap
and commit points.
cc
Two commands that read the current queue + index + elapsed time from
the runtime and call next_item_index / previous_item_index helpers
(already tested in mixtape::enqueue) to compute the target seek
position. Boundary detection uses source_item_id_hint with album_id
fallback, so these also work for queues built via "play album"
outside the Mixtape flow.
Commands are registered and invocable from Tauri but not wired to
any frontend control — per spec §4.5, NowPlayingBar changes are
deferred to a future spec.
cc
Polymorphic resolver handles album / track / playlist x qobuz / local
variants; each maps to the canonical QueueTrack the existing "play
album" paths use. Album shuffle applied at enqueue time, tracks
within each item stay in their native order. source_item_id_hint
stamped centrally so skip-to-item boundary detection (next task)
works consistently.
Includes next_item_index / previous_item_index helpers with unit
tests for both the exact-hint and album_id-fallback cases.
local_track_to_queue_track converts LocalTrack sample_rate from Hz
to kHz and wraps artwork_path as a file:// URL.
cc
vicrodh